.vscode/extensions.json

@@ -2,7 +2,6 @@
     // See http://go.microsoft.com/fwlink/?LinkId=827846
     // for the documentation about the extensions.json format
     "recommendations": [
-        "ijustdev.gitea-vscode",
         "platformio.platformio-ide"
     ],
     "unwantedRecommendations": [

.vscode/settings.json

@@ -1,4 +1,6 @@
 {
-    "gitea.instanceURL": "https://hjkgitunix.dedyn.io/hans-jurgen/Wetterstation_Boris.git",
+    "gitea.instanceURL": "https://hjkgitunix.dedyn.io/",
-    "gitea.owner": "hans-jürgen"
+    "gitea.owner": "hans-jurgen",
+    "gitea.repo": "Wetterstation",
+    "gitea.token": " vscodegitea"
 }

data/Korektur.txt

@@ -0,0 +1 @@
+1.02910

data/error.dat

@@ -1 +0,0 @@
-0

data/status.txt

@@ -0,0 +1 @@
+5

include/error.h

@@ -1,31 +0,0 @@
-#include <Arduino.h>
-
-#include <EEPROM.h>
-
-#define AkkuLeer 0x80
-#define ADS1115noReady 0x01
-#define HTU21noReady 0x02
-#define BMP280noReady 0x04
-#define MCP9808noReady 0x08
-
-byte SystemStatus;
-
-
-
-
-void writeSystemStatus()
-{
-  EEPROM.begin(512);
-  EEPROM.put(0,SystemStatus);
-  EEPROM.commit();
-  EEPROM.end();
-}
-
-void readSystemStatus()
-{
-  EEPROM.begin(512);
-  EEPROM.get(0,SystemStatus);
-  EEPROM.commit();
-  EEPROM.end();
-  
-}

include/mcp9808.h

@@ -11,12 +11,9 @@ float valTemp;
 // Create MCP9808 temperature sensor object
 Adafruit_MCP9808 tempsensor = Adafruit_MCP9808();
 
-bool F_MCP9808;
-
 char Temperature[15] = {0};
 
 void init_MCP9808(){
-  F_MCP9808 = true;
     // Make sure the sensor is found, you can also pass in a different i2c
   // address with tempsensor.begin(0x19) for example, also can be left in blank for default address use
   // Also there is a table with all addres possible for this sensor, you can connect multiple sensors
@@ -32,12 +29,10 @@ void init_MCP9808(){
   //  1  1  1   0x1F
   if (!tempsensor.begin(0x18)) {
     Serial.println("Couldn't find MCP9808! Check your connections and verify the address is correct.");
-    SystemStatus = SystemStatus | MCP9808noReady;
+    datenSave(-20);
-    F_MCP9808 = false;
+    while (1);
-   
-  } else {
-    Serial.println("Found MCP9808!");
   }
+  Serial.println("Found MCP9808!");
   tempsensor.setResolution(3); // sets the resolution mode of reading, the modes are defined in the table bellow:
   // Mode Resolution SampleTime
   //  0    0.5°C       30 ms

include/messADS1115.h

@@ -20,7 +20,6 @@
  * ADS1115_WE adc = ADS1115_WE(&Wire, I2C_ADDRESS); -> all together
  */
 ADS1115_WE adc = ADS1115_WE(I2C_ADDRESS);
-bool F_ADS1115;
 
 struct {
   char Akku[15] = {0};
@@ -29,11 +28,8 @@ struct {
 
 void initADS() {
   Wire.begin();
-  F_ADS1115 = true;
   if(!adc.init()){
     Serial.println("ADS1115 not connected!");
-    SystemStatus = (SystemStatus | ADS1115noReady);  
-    F_ADS1115 = false;
   }
 
   /* Set the voltage range of the ADC to adjust the gain

include/mess_BME280.h

@@ -1,87 +0,0 @@
-#include "Wire.h"
-
-#define Anzahl_Sensoren_BME280 1 // Mögliche Werte: '0','1','2'
-#define Korrektur_Luftdruck 0.0 // Korrekturwert um Abweichungen zu offiziellen Wetterstationen auszugleichen 
-
-
-//----------------------------------------------------------------
-// Konfiguration BME280 - Temperatur und Luftfeuchte
-//----------------------------------------------------------------
-#include "Adafruit_Sensor.h"
-#include "Adafruit_BME280.h"
-uint8_t  BME280_adresse[2] = {0x76, 0x77};
-#define SEALEVELPRESSURE_HPA (1013.25f)
-//----------------------------------------------------------------
-
-
-const float No_Val = 999.99;
-float Temp[2] = {No_Val, No_Val};
-float Feuchte[2] = {No_Val, No_Val};
-float L_Druck[2] = {No_Val, No_Val};
-
-struct {
-  char temperature[15] = {0};
-  char pressure[15] = {0};
-  char approx_altitud[15] = {0};
-  char humity[15] = {0};
-} BME280Data;
-
-void Sensor_BME280() {
-if (Anzahl_Sensoren_BME280 > 0) {
- float Temperatur_BME;
- float Luftfeuchte_BME;
- float Luftdruck_BME;
- boolean check; 
-
- Adafruit_BME280 my_bme;
-
- for (byte i = 0; i < Anzahl_Sensoren_BME280; i++) {
-  check = my_bme.begin(BME280_adresse[i]); // I2C Adresse
-  delay (100); // time to get system ready
-  if (check) { // if bme ok
-   Temperatur_BME = my_bme.readTemperature();
-   Luftfeuchte_BME = my_bme.readHumidity();
-   Luftdruck_BME = my_bme.readPressure();
-   Serial.print("Temperature (BME280):\t\t");
-    Serial.print(Temperatur_BME);
-    Serial.println(" °C");
-    Serial.print("Luftfeuchtigkeit (BME280):\t");
-    Serial.print(Luftfeuchte_BME);
-    Serial.println(" %");
-    Serial.print("Luftdruck (BME280):\t\t");
-    Serial.print(Luftdruck_BME/100);
-    Serial.println(" hPa");
-  } 
-  else {
-   Temperatur_BME = No_Val;
-   Luftfeuchte_BME = No_Val;
-   Luftdruck_BME = No_Val;
-  }
-  if (i == 0) { // erster BME
-   Temp[0] = Temperatur_BME; // Hier kann die Zuordnung der Sensoren geändert werden
-   Feuchte[0] = Luftfeuchte_BME; // Hier kann die Zuordnung der Sensoren geändert werden
-   L_Druck[0] = Luftdruck_BME/100;
-  }
-  if (i == 1) { // zweiter BME
-   Temp[1] = Temperatur_BME; // Hier kann die Zuordnung der Sensoren geändert werden 
-   Feuchte[1] = Luftfeuchte_BME; // Hier kann die Zuordnung der Sensoren geändert werden
-   L_Druck[1] = Luftdruck_BME/100;
-  }
- }
-}
-}
-
-void M2M_BME280(String deviceId = "4711") {
-    char topic[100];
-    dtostrf(Temp[0],7,1,BME280Data.temperature);
-    sprintf(topic, "%s%s%s", "hjk/devices/", deviceId.c_str(), "/telemetry/temperature_BME_280" );
-    client.publish(topic, BME280Data.temperature, true);
-
-    dtostrf(Feuchte[0],7,1,BME280Data.humity);
-    sprintf(topic, "%s%s%s", "hjk/devices/", deviceId.c_str(), "/telemetry/humity_BME280" );
-    client.publish(topic, BME280Data.humity, true);
-
-    dtostrf(L_Druck[0],7,1,BME280Data.pressure);
-    sprintf(topic, "%s%s%s", "hjk/devices/", deviceId.c_str(), "/telemetry/pressure" );
-    client.publish(topic, BME280Data.pressure, true);
-}

include/mess_BMP280.h

@@ -4,12 +4,12 @@
 #include <Adafruit_BMP280.h>
 
 
-#define SEALEVELPRESSURE_HPA (1013.25)  // 1013.25
+#define SEALEVELPRESSURE_HPA (1002.7)  // 1013.25
 // Richen 219 m über NN
 // Eppingem 195 m über NN
 
 Adafruit_BMP280 bmp; // I2C
-float K_BMP280 = -0.0;
+float K_BMP280 = -1.30;
 
 bool F_BMP280;
 
@@ -23,15 +23,14 @@ struct {
   
 
 void Init_BMP280(){
-  bool status = bmp.begin(); 
+  bool status = bmp.begin(0x76); 
   F_BMP280 = true; 
   if (!status) {
     Serial.println("Could not find a valid BME280 sensor, check wiring!");
     F_BMP280 = false;
-    SystemStatus = SystemStatus | BMP280noReady;
   } else{
-    Serial.print("SensorID was: 0x"); Serial.println(bmp.sensorID(),16);
+    /* Serial.print("SensorID was: 0x"); Serial.println(bmp.sensorID(),16);
-    delay(5000);
+    delay(5000); */
     /* Default settings from datasheet. */
     bmp.setSampling(Adafruit_BMP280::MODE_NORMAL,     /* Operating Mode. */
                     Adafruit_BMP280::SAMPLING_X2,     /* Temp. oversampling */
@@ -56,8 +55,8 @@ void read_BMP_280() {
 
     Serial.print("Pressure:\t\t");
     float p = bmp.readPressure() / 100.0F;
-    p = p + KorrekturLuftdruck;
+    //p = p + 22;
-    dtostrf(p,7,1,BMP280Data.pressure);
+    dtostrf(p,5,0,BMP280Data.pressure);
     Serial.print(BMP280Data.pressure);
     Serial.println(" hPa");
 

include/mess_Ub.h

@@ -1,8 +1,9 @@
 #include <Arduino.h>
 
+ADC_MODE(ADC_VCC);
 
 const float MinimalSpannung = 2.85;
-float korectur = 0.001015;
+float korectur = 9.2800899887514060742407199100112e-4;
 char floatString[15] = {0};
 float AKKU;
 
@@ -12,11 +13,10 @@ float getBattery()
     Serial.print("Batterie:\t\t    3.05 V\n");
     return 3.05;
   #endif
-  int Vcc = analogRead(A0);
+  int Vcc = ESP.getVcc();
-  Vcc = Vcc * ((100+220+220)/100);
   float VCC = Vcc * korectur ;
   Serial.printf("Rohdaten: %d, ", Vcc);
-  dtostrf(VCC,8,2,floatString);
+  dtostrf(VCC,7,2,floatString);
-  Serial.printf("Vcc: \t%s V\n", floatString);
+  Serial.printf("Vcc: %s V\n", floatString);
   return VCC;
 }

include/mess_Ub_old.h

@@ -1,7 +1,7 @@
 #include <Arduino.h>
 
 const float MinimalSpannung = 2.85;
-float koa = 0.984326019;
+float korectur = 1.02910;
 char floatString[15] = {0};
 float AKKU;
 

include/mess_htu21.h

@@ -6,7 +6,7 @@
 Adafruit_HTU21DF htu = Adafruit_HTU21DF();
 
 bool F_HTU_21D;
-float K_HTU= -0.00;
+float K_HTU= -1.30;
 
 struct {
   char temperature[15] = {0};
@@ -17,13 +17,10 @@ void init_HTU21(){
     F_HTU_21D = false;
     if (!htu.begin()) {
         Serial.println("Couldn't find sensor HUT21D!");
-        SystemStatus = SystemStatus | HTU21noReady;
     
     }
-    else {
+    F_HTU_21D = true;
-        F_HTU_21D = true;
+    Serial.println("HUT21D gefunden");
-        Serial.println("HUT21D gefunden");
-    }
 }
 
 void read_HTU21D() {

platformio.ini

@@ -12,24 +12,22 @@
 platform = espressif8266
 board = d1
 framework = arduino
-board_build.filesystem = littlefs
+monitor_port = /dev/ttyUSB0
-monitor_port = COM5
 monitor_speed = 74800
 monitor_filters = time
-upload_port = COM5
+board_build.filesystem = littlefs
 lib_deps =
     knolleary/PubSubClient @ 2.8
     adafruit/Adafruit HTU21DF Library @ 1.0.5
+    adafruit/Adafruit BMP280 Library @ 2.6.6
     wollewald/ADS1115_WE @ 1.4.3
     adafruit/Adafruit MCP9808 Library @ 2.0.0
-    adafruit/Adafruit BusIO @ 1.16.1
-    adafruit/Adafruit BME280 Library @ 2.2.4
-    adafruit/Adafruit Unified Sensor @ 1.1.14
 
 build_flags =
     -DTEMPTEST33=1
     -DNOBATT=0
-    -DMaxErrCount=20
+    -DMaxErrCount=30
+    -DMQTT=0
     
   
 
@@ -37,20 +35,19 @@ build_flags =
 build_flags = ${env.build_flags}
     -DDEBUG=0
     -DNOADS=0
-    -DNAME=\"WETTERSTATION\"
+    -DNAME=\"WETTERSTATIONEPPINGEN\"
-    -DSTASSID=\"MagentaWLAN-RGDO\"
+    -DSTASSID=\"St.-Peters-Gasse\"
-    -DSTAPSK=\"93329248424922704583\"
+    -DSTAPSK=\"1952994784599318\"
     -DGATEWAY=\"192.168.127.1\"
     -DDNS=\"192.168.127.1\"
-    -DKMYIP=\"192.168.127.40\"
+    -DKMYIP=\"192.168.127.48\"
     -Dmqtt_server=\"hjkmqtt.dedyn.io\"
-    -Dmqtt_port=61883
+    -Dmqtt_port=8883
     -DTERROR=5
     -DTLOWBATT=60
     -DTINTERVAL=1
-    -DKorrekturLuftdruck=0.0
 
-[env:marcel]   ; Produktivsystem: 
+[env:release]   ; Produktivsystem: 
 build_flags = ${env.build_flags}
     -DDEBUG=0
     -DEMAIL=\"koerner.c.m@gmail.com\"
@@ -65,56 +62,4 @@ build_flags = ${env.build_flags}
     -DTERROR=20
     -DTLOWBATT=60
     -DTINTERVAL=10
-    -DKorrekturLuftdruck=0.0
-
-[env:boris]   ; Produktivsystem: 
-build_flags = ${env.build_flags}
-    -DDEBUG=0
-    -DEMAIL=\"koerner.c.m@gmail.com\"
-    -DNAME=\"WETTERSTATIONBORIS\"
-    -DSTASSID=\"FRITZ!Box7362SL\"
-    -DSTAPSK=\"BorisundEva2007\"
-    -DGATEWAY=\"192.168.2.1\"
-    -DDNS=\"192.168.2.1\"
-    -DKMYIP=\"192.168.2.41\"
-    -Dmqtt_server=\"hjkmqtt.dedyn.io\"
-    -Dmqtt_port=8883
-    -DTERROR=20
-    -DTLOWBATT=60
-    -DTINTERVAL=5
-    -DKorrekturLuftdruck=0.0
-
-[env:hjk]
-build_flags = ${env.build_flags}
-    -DDEBUG=0
-    -DNOADS=0
-    -DNAME=\"WETTERSTATION\"
-    -DSTASSID=\"MagentaWLAN-RGDO\"
-    -DSTAPSK=\"93329248424922704583\"
-    -DGATEWAY=\"192.168.127.1\"
-    -DDNS=\"192.168.127.1\"
-    -DKMYIP=\"192.168.127.41\"
-    -Dmqtt_server=\"hjkmqtt.dedyn.io\"
-    -Dmqtt_port=61883
-    -DTERROR=5
-    -DTLOWBATT=60
-    -DTINTERVAL=10
-    -DKorrekturLuftdruck=23.6
-
-[env:filamentbox]
-build_flags = ${env.build_flags}
-    -DDEBUG=0
-    -DNOADS=0
-    -DNAME=\"filamenbox\"
-    -DSTASSID=\"MagentaWLAN-RGDO\"
-    -DSTAPSK=\"93329248424922704583\"
-    -DGATEWAY=\"192.168.127.1\"
-    -DDNS=\"192.168.127.1\"
-    -DKMYIP=\"192.168.127.42\"
-    -Dmqtt_server=\"hjkmqtt.dedyn.io\"
-    -Dmqtt_port=61883
-    -DTERROR=5
-    -DTLOWBATT=60
-    -DTINTERVAL=15
-    -DKorrekturLuftdruck=0.0
 

src/main.cpp

@@ -1,11 +1,12 @@
 #include <Arduino.h>
 #include <FS.h>                   //this needs to be first, or it all crashes and burns...
+#include <LittleFS.h>
 #include <string>
 #include <ESP8266WiFi.h>          //https://github.com/esp8266/Arduino
 #include <PubSubClient.h>
 #include <Ticker.h>
 
-// #define BUILTIN_LED D2
+#define BUILTIN_LED D15
 #define TRIGGER_PIN    D7 
 #define START_STOP_PIN D6
 
@@ -13,20 +14,20 @@
 
 void reconnect();
 void setup_wifi();
-
+void datenSave(int wert);
+int readDaten();
+int saveKorektur(float wert);
+float readKorectur();
 void verifyFingerprint();
 void callback(char* topic1, byte* payload, unsigned int length);
 void pulse_pin(uint8_t pin);
 
-WiFiClient espClient;
+WiFiClientSecure espClient;
 PubSubClient client(espClient);
 
-#include <error.h>
-
 #include<mess_htu21.h>
 
-//#include <mess_BMP280.h>
+#include <mess_BMP280.h>
-#include <mess_BME280.h>
 
 #include <mess_Ub.h>
 
@@ -35,7 +36,6 @@ PubSubClient client(espClient);
 #include <mcp9808.h>
 
 
-
 const char* ssid = STASSID;
 const char* password = STAPSK;
 String hostname = NAME;
@@ -67,69 +67,79 @@ char topic[100];
 char topic_1[50];
 char topicWert[20];
 char msg[20];
-long int Feldstaerke;
+int SystemStatus;
 
 
 
 void setup() {
-  startTime = millis();
+  pinMode(TRIGGER_PIN, OUTPUT);
-  /* pinMode(BUILTIN_LED, OUTPUT);
+  pinMode(START_STOP_PIN, OUTPUT);
-  digitalWrite(BUILTIN_LED, LOW);
+  digitalWrite(TRIGGER_PIN, HIGH);
-  delay(5000);
+  digitalWrite(START_STOP_PIN, LOW);
-  digitalWrite(BUILTIN_LED, HIGH); */
+  pulse_pin(TRIGGER_PIN);      // ==> 1
   Serial.begin(74880);
   while ( !Serial ) delay(100);   // wait for native usb
+  Serial.println(F("BMP280 Sensor event test"));
+  Serial.println("HTU21D-F test");
+  startTime = millis();
   WiFi.mode( WIFI_OFF );
   WiFi.forceSleepBegin();
+  pulse_pin(TRIGGER_PIN);      // ==> 1
   Serial.println();
-
+  //Serial.println("Testpunkt 1");
+  /* if (!LittleFS.begin()) {
+    Serial.println("LittleFS mount failed");
+    delay(5000);
+    return;
+  } */
+  //Serial.println("Testpunkt 2");
+  /* Dir dir = LittleFS.openDir("/data");
+  while (dir.next()) {
+    Serial.print(dir.fileName());
+    if(dir.fileSize()) {
+        File f = dir.openFile("r");
+        Serial.println(f.size());
+    }
+  } */
+  //Serial.println("Testpunkt 3");
   Serial.println();
   Serial.println();
   Serial.println();
-  readSystemStatus();
+  //SystemStatus = readDaten();
-  Serial.printf("Systemstatus : 0x%02x \n", SystemStatus);
+  //korectur = readKorectur();
-  SystemStatus = 0x00;
+  //Serial.print("Korektur: "); Serial.println(korectur,6);
-  writeSystemStatus();
+  pinMode(BUILTIN_LED, OUTPUT);     // Initialize the BUILTIN_LED pin as an output
-  delay(500);
+  //digitalWrite(BUILTIN_LED, LOW);
+  //digitalWrite(BUILTIN_LED, HIGH);
+  //Serial.print("STATUS (Systemmeldung): "); Serial.println(SystemStatus);
   #if (MQTT == 0)
   init_HTU21();
-  //Init_BMP280();
+  Init_BMP280();
-  Sensor_BME280();
+  //initADS();
-
+  //init_MCP9808();
-  init_MCP9808();
-  initADS();
   #endif
-  if (!F_ADS1115 == true){
+  AKKU = getBattery();  // ca. 170 ms
-    AKKU = getBattery();  // ca. 170 ms
-    Serial.println("ALTE UB MESSUNG:");
-  }
-  else{
-    MessungADS();
-    AKKU = readChannel(ADS1115_COMP_0_GND);
-  }
   // ca. 280 ms
   if (F_HTU_21D == true){
     read_HTU21D();
   }
-  if (F_ADS1115 == true){
+  read_BMP_280();
-    MessungADS();
+  //MessungADS();
-  }
-  /* if (F_BMP280 == true){
-    read_BMP_280();
-  }*/
-  if (F_MCP9808 == true){
-    valTemp = getTemperature_MCP9808();
-  }
   setup_wifi();  // ca. 4,5 s
+  // ca. 12ms
+  // ---------------------------------
+  // Status ändern !!! 0
+  //datenSave(0);
+  // ---------------------------------
+  //digitalWrite(BUILTIN_LED, HIGH);
   deviceId = ESP.getChipId();
   sprintf(sID, "%010ld", deviceId);
   Serial.print("ID: \t\t"); Serial.println(deviceId);
   
   // ca. 5 s
-  //espClient.setFingerprint(mqtt_fprint); 
+  espClient.setFingerprint(mqtt_fprint); 
   client.setServer(mqtt_server, mqtt_port);
   client.setCallback(callback);
-  Serial.printf("Systemstatus : 0x%02x \n", SystemStatus);
   //----------
   
 }
@@ -139,40 +149,38 @@ void loop() {
   if (!client.connected()) {
     reconnect();
   }
+  //client.loop();
   int currentMillis = millis();
   if (currentMillis - previousMillis >= 10000) {
     previousMillis = currentMillis;
+    read_HTU21D();
+    read_BMP_280();
+    //valTemp = getTemperature_MCP9808();
     dtostrf(AKKU,8,2,ADSData.Akku);
     sprintf(topic, "%s%s%s", "hjk/devices/", hostname.c_str(), "/telemetry/battery" );
     client.publish(topic, ADSData.Akku, true);
-    if (F_ADS1115 == true){
+    #if(MQTT == 0)
-      sprintf(topic, "%s%s%s", "hjk/devices/", hostname.c_str(), "/telemetry/Solar" );
+    M2M_HTU21D(hostname.c_str());
-      client.publish(topic, ADSData.Solar, true);
+    M2M_BMP280(hostname.c_str());
-    }
+    M2M_Temperatur_MCP9808(hostname.c_str());
-    
+    #endif
-    if (F_HTU_21D) M2M_HTU21D(hostname.c_str());
+    long int Feldstaerke = WiFi.RSSI();
-    M2M_BME280(hostname.c_str());
-    if (F_MCP9808) M2M_Temperatur_MCP9808(hostname.c_str());
     sprintf(msg,"%ld", Feldstaerke);
     sprintf(topic, "%s%s%s", "hjk/devices/", hostname.c_str(), "/telemetry/RSSI" );
     client.publish(topic, msg, true);
-    sprintf(msg,"0x%02x", SystemStatus);
-    sprintf(topic, "%s%s%s", "hjk/devices/", hostname.c_str(), "/telemetry/SystemStatus" );
-    client.publish(topic, msg, true);
     client.loop();
     delay(500);
-    //digitalWrite(BUILTIN_LED, HIGH);
+    digitalWrite(BUILTIN_LED, HIGH);
     /* ESP.deepSleep(5e6);
     delay(100); */
     endTime = millis();
     if (AKKU < MinimalSpannung){
-      
+      // ---------------------------------
+      // Status ändern !!! -5
+      datenSave(-5);
       // ---------------------------------
       Pause = intervalLowBatt -((endTime - startTime) * 1000); // Pause ca. 60 Minuten
       Serial.println("AKKU entladen!");
-      SystemStatus = (SystemStatus | AkkuLeer);  
-      Serial.printf("Systemstatus : 0x%04x \n", SystemStatus);
-      writeSystemStatus();
     }
     else{
       Pause = interval -((endTime - startTime) * 1000);      // Pause ca. 15 Minuten
@@ -187,7 +195,6 @@ void loop() {
     #if (DEBUG == 1)
     ESP.deepSleep(10e6);
     #else
-    writeSystemStatus();
     ESP.deepSleep(Pause);
     #endif
     
@@ -210,7 +217,7 @@ void setup_wifi() {
   delay( 1 );
   WiFi.persistent( false );
   WiFi.mode( WIFI_STA );
-  WiFi.setHostname(hostname.c_str()); //define hostname
+  //WiFi.setHostname(hostname.c_str()); //define hostname
   WiFi.hostname(hostname.c_str());
   WiFi.mode( WIFI_STA );
   if (!ip.fromString(MyIP)) { // try to parse into the IPAddress
@@ -235,6 +242,10 @@ void setup_wifi() {
     Serial.print(".");
     ErrCount ++;
     if (ErrCount >= MaxErrCount){
+      // ---------------------------------
+      // Status ändern !!! -1
+      datenSave(-1);
+      // ---------------------------------
       endTime = millis();
       unsigned long Pause = stoerung -((endTime - startTime) * 1000); // Pause
       Serial.println();
@@ -246,8 +257,7 @@ void setup_wifi() {
     }
   Serial.println(" WiFi connected");
   Serial.print("IP address: \t");
-  Feldstaerke = WiFi.RSSI();
+  Serial.print(WiFi.localIP()); Serial.print("\tRESSI: "); Serial.println(WiFi.RSSI());
-  Serial.print(WiFi.localIP()); Serial.print("\tRESSI: "); Serial.println(Feldstaerke);
   /* delay(2000);
   ESP.deepSleep(2e6, WAKE_RF_DEFAULT);
   delay(100); */
@@ -268,22 +278,28 @@ void callback(char* topic1, byte* payload, unsigned int length)
     Serial.println();
     korectur = atof(msg);
     Serial.print("Korektur:\t");Serial.println(korectur, 8);
+    int er = saveKorektur(korectur);
+    if (er != 0){
+      Serial.println("Daten konnten nicht gespeichert werden.");
+    }
+    float test = readKorectur();
+    Serial.print("Korektur:\t");Serial.println(test, 8);
   }
 }
 
 void reconnect() {
   // Loop until we're reconnected
-  sprintf(clientName, "%s%s", "ESP8266Wetter", sID);
+  sprintf(clientName, "%s%s", "ESP8266Client", sID);
   while (!client.connected()) {
     Serial.print("Attempting MQTT connection...");
-    //verifyFingerprint();
+    verifyFingerprint();
     // Attempt to connect
     if (client.connect(clientName)) {
       Serial.println("connected");
       // Once connected, publish an announcement...
-      // client.publish("outTopic", "hello world");
+      client.publish("outTopic", "hello world");
       // ... and resubscribe
-      // client.subscribe("inTopic");
+      client.subscribe("inTopic");
     } else {
       Serial.print("failed, rc=");
       Serial.print(client.state());
@@ -295,9 +311,56 @@ void reconnect() {
   }
 }
 
+void datenSave(int wert){
+  File k = LittleFS.open("/status.txt", "w");
+  if(!k){
+    Serial.println("file open failed");
+  }
+  k.println(wert);
+  k.close();
+}
 
+int readDaten()
+{
+  int Error;
+  File k = LittleFS.open("/status.txt", "r");
+  if(!k){
+    Serial.println("file open failed");
+    Error = -10;
+  }else{
+    String data = k.readString();
+    Error = data.toInt();  
+    k.close();
+  }
+  return Error;
+}
 
+int saveKorektur(float wert){
+  int Error = 0;
+  File k = LittleFS.open("/Korektur.txt", "w");
+  if(!k){
+    Serial.println("file open failed");
+    Error = -1;
+  }else{
+    k.println(String(wert,8));
+    k.close();
+  }
+  return Error;
+}
 
+float readKorectur(){
+  float Korektur;
+  File k = LittleFS.open("/Korektur.txt", "r");
+  if(!k){
+    Serial.println("file open failed");
+    Korektur = 1.00;
+  }else{
+    String data = k.readString();
+    Korektur = data.toFloat();  
+    k.close();
+  }
+  return Korektur;
+}
 
 void verifyFingerprint() {
   unsigned long Pause = 0;

workspace.code-workspace

@@ -0,0 +1,4 @@
+{
+	"folders": [],
+	"settings": {}
+}