From e68c51870f64408f5c05c4ecf7f3af117d6cb248 Mon Sep 17 00:00:00 2001 From: hans-jurgen Date: Sun, 30 Jun 2024 19:52:32 +0200 Subject: [PATCH] testlinux --- .gitignore | 5 ++ .vscode/extensions.json | 10 ++++ .vscode/settings.json | 6 +++ include/README | 39 ++++++++++++++ lib/README | 46 +++++++++++++++++ platformio.ini | 25 +++++++++ src/main.cpp | 110 ++++++++++++++++++++++++++++++++++++++++ test/README | 11 ++++ 8 files changed, 252 insertions(+) create mode 100755 .gitignore create mode 100755 .vscode/extensions.json create mode 100755 .vscode/settings.json create mode 100755 include/README create mode 100755 lib/README create mode 100755 platformio.ini create mode 100755 src/main.cpp create mode 100755 test/README diff --git a/.gitignore b/.gitignore new file mode 100755 index 0000000..89cc49c --- /dev/null +++ b/.gitignore @@ -0,0 +1,5 @@ +.pio +.vscode/.browse.c_cpp.db* +.vscode/c_cpp_properties.json +.vscode/launch.json +.vscode/ipch diff --git a/.vscode/extensions.json b/.vscode/extensions.json new file mode 100755 index 0000000..080e70d --- /dev/null +++ b/.vscode/extensions.json @@ -0,0 +1,10 @@ +{ + // See http://go.microsoft.com/fwlink/?LinkId=827846 + // for the documentation about the extensions.json format + "recommendations": [ + "platformio.platformio-ide" + ], + "unwantedRecommendations": [ + "ms-vscode.cpptools-extension-pack" + ] +} diff --git a/.vscode/settings.json b/.vscode/settings.json new file mode 100755 index 0000000..e2ea366 --- /dev/null +++ b/.vscode/settings.json @@ -0,0 +1,6 @@ +{ + "gitea.repo": "Test_BME280", + "gitea.owner": "hans-jurgen", + "gitea.instanceURL": "https://hjkgitunix.dedyn.io", + "gitea.token": "0e5be354192e95a01f2990588f4c96b7f51f152f" +} \ No newline at end of file diff --git a/include/README b/include/README new file mode 100755 index 0000000..45496b1 --- /dev/null +++ b/include/README @@ -0,0 +1,39 @@ + +This directory is intended for project header files. + +A header file is a file containing C declarations and macro definitions +to be shared between several project source files. You request the use of a +header file in your project source file (C, C++, etc) located in `src` folder +by including it, with the C preprocessing directive `#include'. + +```src/main.c + +#include "header.h" + +int main (void) +{ + ... +} +``` + +Including a header file produces the same results as copying the header file +into each source file that needs it. Such copying would be time-consuming +and error-prone. With a header file, the related declarations appear +in only one place. If they need to be changed, they can be changed in one +place, and programs that include the header file will automatically use the +new version when next recompiled. The header file eliminates the labor of +finding and changing all the copies as well as the risk that a failure to +find one copy will result in inconsistencies within a program. + +In C, the usual convention is to give header files names that end with `.h'. +It is most portable to use only letters, digits, dashes, and underscores in +header file names, and at most one dot. + +Read more about using header files in official GCC documentation: + +* Include Syntax +* Include Operation +* Once-Only Headers +* Computed Includes + +https://gcc.gnu.org/onlinedocs/cpp/Header-Files.html diff --git a/lib/README b/lib/README new file mode 100755 index 0000000..a10cade --- /dev/null +++ b/lib/README @@ -0,0 +1,46 @@ + +This directory is intended for project specific (private) libraries. +PlatformIO will compile them to static libraries and link into executable file. + +The source code of each library should be placed in an own separate directory +("lib/your_library_name/[here are source files]"). + +For example, see a structure of the following two libraries `Foo` and `Bar`: + +|--lib +| | +| |--Bar +| | |--docs +| | |--examples +| | |--src +| | |- Bar.c +| | |- Bar.h +| | |- library.json (optional, custom build options, etc) https://docs.platformio.org/page/librarymanager/config.html +| | +| |--Foo +| | |- Foo.c +| | |- Foo.h +| | +| |- README --> THIS FILE +| +|- platformio.ini +|--src + |- main.c + +and a contents of `src/main.c`: +``` +#include +#include + +int main (void) +{ + ... +} + +``` + +PlatformIO Library Dependency Finder will find automatically dependent +libraries scanning project source files. + +More information about PlatformIO Library Dependency Finder +- https://docs.platformio.org/page/librarymanager/ldf.html diff --git a/platformio.ini b/platformio.ini new file mode 100755 index 0000000..0a1aca4 --- /dev/null +++ b/platformio.ini @@ -0,0 +1,25 @@ +; PlatformIO Project Configuration File +; +; Build options: build flags, source filter +; Upload options: custom upload port, speed and extra flags +; Library options: dependencies, extra library storages +; Advanced options: extra scripting +; +; Please visit documentation for the other options and examples +; https://docs.platformio.org/page/projectconf.html + +[env:d1] +platform = espressif8266 +board = d1 +framework = arduino +monitor_speed =115200 +upload_speed = 115200 +monitor_filters = time +lib_deps = + adafruit/Adafruit BusIO @ 1.16.1 + adafruit/Adafruit BME280 Library @ 2.2.4 + adafruit/Adafruit Unified Sensor @ 1.1.14 + +build_flags = + -DKorrekturLuftdruck=23.6 + \ No newline at end of file diff --git a/src/main.cpp b/src/main.cpp new file mode 100755 index 0000000..d1d5396 --- /dev/null +++ b/src/main.cpp @@ -0,0 +1,110 @@ +#include + +// put function declarations here: +int myFunction(int, int); + +/*************************************************************************** + This is a library for the BME280 humidity, temperature & pressure sensor + + Designed specifically to work with the Adafruit BME280 Breakout + ----> http://www.adafruit.com/products/2650 + + These sensors use I2C or SPI to communicate, 2 or 4 pins are required + to interface. The device's I2C address is either 0x76 or 0x77. + + Adafruit invests time and resources providing this open source code, + please support Adafruit andopen-source hardware by purchasing products + from Adafruit! + + Written by Limor Fried & Kevin Townsend for Adafruit Industries. + BSD license, all text above must be included in any redistribution + ***************************************************************************/ + +#include +#include +#include +#include + +#define BME_SCK 13 +#define BME_MISO 12 +#define BME_MOSI 11 +#define BME_CS 10 + +#define SEALEVELPRESSURE_HPA (1013.25) +#define Korrektur_Luftdruck KorrekturLuftdruck // Korrekturwert um Abweichungen zu offiziellen Wetterstationen auszugleichen + +Adafruit_BME280 bme; // I2C +//Adafruit_BME280 bme(BME_CS); // hardware SPI +//Adafruit_BME280 bme(BME_CS, BME_MOSI, BME_MISO, BME_SCK); // software SPI + +unsigned long delayTime; +void printValues(); + +void setup() { + Serial.begin(115200); + Serial.println(F("BME280 test")); + + unsigned status; + + // default settings + status = bme.begin(); + // You can also pass in a Wire library object like &Wire2 + // status = bme.begin(0x76, &Wire2) + if (!status) { + Serial.println("Could not find a valid BME280 sensor, check wiring, address, sensor ID!"); + Serial.print("SensorID was: 0x"); Serial.println(bme.sensorID(),16); + Serial.print(" ID of 0xFF probably means a bad address, a BMP 180 or BMP 085\n"); + Serial.print(" ID of 0x56-0x58 represents a BMP 280,\n"); + Serial.print(" ID of 0x60 represents a BME 280.\n"); + Serial.print(" ID of 0x61 represents a BME 680.\n"); + while (1) delay(10); + } + + delayTime = 10000; + + Serial.println(); +} + + +void loop() { + printValues(); + delay(delayTime); +} + + +void printValues() { + float t = 0.0; + float p = 0.0; + float a = 0.0; + float h = 0.0; + char ct[15]; + char cp[15]; + char ca[15]; + char ch[15]; + Serial.print("Temperature:\t\t"); + t = bme.readTemperature(); + dtostrf(t,11,3,ct); + Serial.print(ct); + Serial.println(" °C"); + + Serial.print("Humidity:\t\t"); + h = bme.readHumidity(); + dtostrf(h,11,3,ch); + Serial.print(ch); + Serial.println(" %"); + + Serial.print("Pressure:\t\t"); + p = bme.readPressure() / 100.0F; + p = p + Korrektur_Luftdruck; + dtostrf(p,9,1,cp); + Serial.print(cp); + Serial.println(" hPa"); + + Serial.print("Approx. Altitude:\t"); + a = bme.readAltitude(SEALEVELPRESSURE_HPA); + dtostrf(a,11,3,ca); + Serial.print(ca); + Serial.println(" m über NN"); + + Serial.println(); +} diff --git a/test/README b/test/README new file mode 100755 index 0000000..b0416ad --- /dev/null +++ b/test/README @@ -0,0 +1,11 @@ + +This directory is intended for PlatformIO Test Runner and project tests. + +Unit Testing is a software testing method by which individual units of +source code, sets of one or more MCU program modules together with associated +control data, usage procedures, and operating procedures, are tested to +determine whether they are fit for use. Unit testing finds problems early +in the development cycle. + +More information about PlatformIO Unit Testing: +- https://docs.platformio.org/en/latest/advanced/unit-testing/index.html