Fehler wegen Laufschrift beseitigt.

platformio.ini

@@ -13,9 +13,9 @@ platform = espressif32
 board = nodemcu-32s
 framework = arduino
 monitor_speed = 115200
-monitor_port = /dev/ttyUSB0
+monitor_port = COM3
 monitor_filters = time
-upload_port = /dev/ttyUSB0
+upload_port = COM3
 lib_deps =
     knolleary/PubSubClient @ 2.8
     adafruit/Adafruit GFX Library @ 1.11.3
@@ -29,7 +29,7 @@ build_flags =
 [env:debug]     ; Entwicklungssystem
 build_flags = ${env.build_flags}
     -DDEBUG=1
-    -DGRENZWERT=3.80
+    -DGRENZWERT=3.70
     -DSTASSID=\"St.-Peters-Gasse\"
     -DSTAPSK=\"1952994784599317\"
     -DGATEWAY=\"192.168.127.1\"
@@ -39,8 +39,9 @@ build_flags = ${env.build_flags}
     -DSUBNET=\"255.255.255.0\"
     -Dmqtt_server=\"hjkmqtt.dedyn.io\"
     -Dmqtt_port=61883
-    -DINNEN=\"hjk/devices/MESSUNITTEMPBORIS/telemetry/temperature_Htu_21\"
-    -DCO2=\"hjk/devices/WETTERSTATION/telemetry/co2\"
+    -DINNEN=\"hjk/devices/TEMPWOHNZIM/telemetry/temperature\"
+    -DFLUR=\"hjk/devices/TEMPFLUR/telemetry/temperature\"
+    -DCO2=\"hjk/devices/257923/telemetry/co2\"
     -DAKKU=\"hjk/devices/WETTERSTATION/telemetry/battery\"
     -DWETTER=\"hjk/devices/WETTERSTATION/telemetry/temperature_Htu_21\"
     -DLUFTDRUCK=\"hjk/devices/WETTERSTATION/telemetry/pressure\"
@@ -61,7 +62,6 @@ build_flags = ${env.build_flags}
     -Dmqtt_server=\"hjkmqtt.dedyn.io\"
     -Dmqtt_port=61883
     -DINNEN=\"hjk/devices/MESSUNITTEMPBORIS/telemetry/temperature_Htu_21\"
-    -DCO2=\"hjk/devices/WETTERSTATIONBORIS/telemetry/co2\"
     -DAKKU=\"hjk/devices/WETTERSTATIONBORIS/telemetry/battery\"
     -DWETTER=\"hjk/devices/WETTERSTATIONBORIS/telemetry/temperature_Htu_21\"
     -DLUFTDRUCK=\"hjk/devices/WETTERSTATIONBORIS/telemetry/pressure\"

src/main.cpp

@@ -123,7 +123,8 @@ int Co2 = 0.00;
 float Covid19 = 0.00;
 float Aussentemp = -99.90;
 int Pressure = 0;
-float FlurTemp = -99.90;
+float TempWohn = -99.90;
+float TempFlur = -99.99;
 float Luftfeuchtigkeit = 0.00;
 float Akku = -99.00;
 int Helligkeit = 255;
@@ -141,11 +142,17 @@ char clientName[30];
 
 const char* topic_Innen = INNEN;
 const char* topic_Akku = AKKU;
+#ifdef CO2
 const char* topic_Co2 = CO2;
+#endif
 const char* topic_Wetter = WETTER; 
 const char* topic_Pressure = LUFTDRUCK; 
 const char* topic_Luftfeuchtigkeit = FEUCHTIGKEIT;
 const char* topic_Helligkeit = HELLIGKEIT;
+#ifdef FLUR
+const char* topic_Flur = FLUR;
+#endif
+
 
 
 void callback(char* topic1, byte* payload, unsigned int length);
@@ -233,7 +240,7 @@ void callback(char* topic1, byte* payload, unsigned int length) {
   msg[length] = '\0';
   //Serial.println(msg);
 
-
+  #ifdef CO2
   // CO2 Wert vom Sensor
   if(strcmp(topic1, topic_Co2)== 0){ 
     Serial.print("Co2 Sensor: ");
@@ -241,9 +248,10 @@ void callback(char* topic1, byte* payload, unsigned int length) {
     Serial.println();
     Co2 = atoi(msg);
   }
-
+  #endif
+  
   // Covid19 Wert
- /*   if(strcmp(topic1, topic_Covid)== 0){ 
+  /*  if(strcmp(topic1, topic_Covid)== 0){ 
     Serial.print("Covid: ");
     Serial.print(msg);
     Serial.println();
@@ -267,8 +275,16 @@ void callback(char* topic1, byte* payload, unsigned int length) {
     Serial.print("Temperatur Innen: ");
     Serial.print(msg);
     Serial.println(" °C");
-    FlurTemp = atof(msg);
+    TempWohn = atof(msg);
   }
+  #ifdef FLUR
+  if(strcmp(topic1, topic_Flur)== 0){ 
+    Serial.print("Temperatur Flur: ");
+    Serial.print(msg);
+    Serial.println(" °C");
+    TempFlur = atof(msg);
+  }
+  #endif
   if(strcmp(topic1, topic_Luftfeuchtigkeit)== 0){ 
     Serial.print("Luftfeuchtigkeit: ");
     Serial.print(msg);
@@ -292,18 +308,23 @@ void callback(char* topic1, byte* payload, unsigned int length) {
   }
 }
 void reconnect() {
-  sprintf(clientName, "%s%s", "Uhr", "_Zentrale3" );
+  sprintf(clientName, "%s%s", "Uhr", "Zentrale4" );
   // Loop until we're reconnected
   while (!client.connected()) {
     Serial.print("Attempting MQTT connection...");
     if (client.connect(clientName)) {
       /* MQTTStatus.setPic(3); */
       Serial.println("connected");
-      //client.subscribe(topic_Co2);
+      #ifdef CO2
+      client.subscribe(topic_Co2);
+      #endif
       //client.subscribe(topic_Covid);Ja
       client.subscribe(topic_Wetter);
       client.subscribe(topic_Pressure);
       client.subscribe(topic_Innen);
+      #ifdef FLUR
+      client.subscribe(topic_Flur);
+      #endif
       client.subscribe(topic_Luftfeuchtigkeit);
       client.subscribe(topic_Akku);
       client.subscribe(topic_Helligkeit);
@@ -349,7 +370,7 @@ void ZeigeZeit(tm localTime, int xPos = 2, int yPos = 8)
   display.setFont();
 }
 
-/* void ZeigeCO(int xPos = 1, int yPos = 19)
+void ZeigeCO(int xPos = 1, int yPos = 19)
 {
   if (xPos < 1) xPos = 1;
   if (yPos < 19) yPos = 19;
@@ -390,7 +411,7 @@ void ZeigeZeit(tm localTime, int xPos = 2, int yPos = 8)
     display.print("ppm");
     display.setFont();
   }
-} */
+}
 
 void ZeigeDatum(tm localTime, int xPos = 2, int yPos = 1)
 {
@@ -427,7 +448,7 @@ void ZeigeWetter(double Wetter1, int yPos = 2, int xPos = 1)
     dtostrf(Wetter1, 4, 1, szWetter);
     display.setCursor(xPos, yPos); 
     display.fillRect(xPos, yPos-2, 64-xPos, 8+2, (myBLACK));
-    display.setTextColor(myBLUE);
+    display.setTextColor(myWHITE);
     display.print(szWetter);
     // Erzeuge Grad Zeichen ......
     display.setCursor(xPos+24, yPos-5); 
@@ -481,7 +502,7 @@ void setup() {
   display.setMuxPattern(BINARY);
 
   // Set the color order {RRGGBB, RRBBGG, GGRRBB, GGBBRR, BBRRGG, BBGGRR} (default is RRGGBB)
-  display.setColorOrder(RRGGBB);
+  display.setColorOrder(BBRRGG);
 
   // Set the time in microseconds that we pause after selecting each mux channel
   // (May help if some rows are missing / the mux chip is too slow)
@@ -507,11 +528,11 @@ void setup() {
   display.print("Pixel");
   display.setTextColor(myYELLOW);
   display.setCursor(30,50);
-  display.print("Time");
+  display.print("1234");
 //--------------------------------------------------
 //--------------------------------------------------
 
-  delay(5000);
+  delay(1000);
   print_wifi_status();
   configTime(0, 0, NTP_SERVER);
   // See https://github.com/nayarsystems/posix_tz_db/blob/master/zones.csv for Timezone codes for your region
@@ -706,10 +727,12 @@ static void setup_wifi() {
 
 void loop() {
   
+  getNTPtime(10);
   if (!client.connected()) {
     reconnect();
   }
-  getNTPtime(10);
+  client.loop();
+  
   if (millis() - lastTime >= 1000)
   {
     lastTime = millis();
@@ -717,7 +740,7 @@ void loop() {
     ZeigeDatum(timeinfo, 1, 1);
     ZeigeZeit(timeinfo, TimeX, TimeY);
     //ZeigeZeit(timeinfo, 1,40);
-    //ZeigeCO(1,CoY);
+    ZeigeCO(1,CoY);
     /* if ((timeinfo.tm_min % 10) == 0){
       /* if (Covid19 != 0){
         scroll_text(matrix_height-8,20,"Landkreis Heilbronn", 30,30,30, true);
@@ -749,13 +772,35 @@ void loop() {
     scroll_text2(matrix_height-24,20,"ich w\201nsche Euch allen ein", 128,128,0, true);
     scroll_text2(matrix_height-24,20,"Frohes neues Jahr 2022.", 128,255,0, true); */
     
-    ZeigeWetter(double(FlurTemp), WetterY,WetterX);
+    ZeigeWetter(double(TempWohn), WetterY,WetterX);
+    //Serial.println("START");
     if (Aussentemp > -99.9){
-        scroll_text(matrix_height-8,30,"Luftdruck: " + String(Pressure) + " hPa", 255,255,255, true);
         char szWetter[10]; 
+        dtostrf(TempFlur, 4, 1, szWetter);
+        //Serial.print(Aussentemp); Serial.print("  "); Serial.println(szWetter);
+        scroll_Grad(matrix_height-8,30,"            Flur: " + String(szWetter), 64,64,64, true);
+        /* Achtung sehr wichtig,
+        wenn das gesamt Laufschrift mehr 
+        als 30 Sekunden Dauert muss ein .... */
+        client.loop();
+        /* eingeführt werden, sonst kommt es zu 
+        einen Socket Fehler !!!! */
+        scroll_text(matrix_height-8,30,"Luftdruck: " + String(Pressure) + " hPa", 255,255,255, true);
         dtostrf(Aussentemp, 4, 1, szWetter);
         //Serial.print(Aussentemp); Serial.print("  "); Serial.println(szWetter);
+        /* Achtung sehr wichtig,
+        wenn das gesamt Laufschrift mehr 
+        als 30 Sekunden Dauert muss ein .... */
+        client.loop();
+        /* eingeführt werden, sonst kommt es zu 
+        einen Socket Fehler !!!! */
         scroll_Grad(matrix_height-8,30,"Aussentemperatur: " + String(szWetter), 64,64,64, true); 
+        /* Achtung sehr wichtig,
+        wenn das gesamt Laufschrift mehr 
+        als 30 Sekunden Dauert muss ein .... */
+        client.loop();
+        /* eingeführt werden, sonst kommt es zu 
+        einen Socket Fehler !!!! */
         dtostrf(Luftfeuchtigkeit, 4, 1, szWetter);
         scroll_text(matrix_height-8,30,"Luftfeuchtigkeit: " + String(szWetter) + " %", 64,64,64, true);
       }
@@ -763,8 +808,8 @@ void loop() {
       scroll_text(matrix_height-8,40,"Akku: " + String(Akku) + " Volt", 255, 0, 0, true);
       scroll_text(matrix_height-8,40,"Akku aufladen!", 255, 0, 0, true);
     }
-  }
-  client.loop(); 
+    //Serial.println("STOP");
+  } 
 }
 
 bool getNTPtime(int sec) {
@@ -782,7 +827,7 @@ bool getNTPtime(int sec) {
     /* char time_output[30];
     strftime(time_output, 30, "%a  %d-%m-%y %T", localtime(&now));
     Serial.println(time_output);
-    Serial.println(); */
+    Serial.println(12); */
   }
   return true;
 }