2025-12-0200 Störung MQTT !!

src/main.cpp

@@ -117,6 +117,8 @@ u_int16_t EndederAbdunklung = 7;
 
 //------ Speicher für Sekunden ------
 uint8_t SekOld  = 99;
+uint8_t SekError  = 0;
+uint16_t ErrorOld  = 0;
 
 // Wifi
 // Wifi
@@ -168,6 +170,7 @@ bool NOHTU = false;
 bool readHtuFlag = true;
 float akku = 5.00;
 int Helligkeit = 255;
+bool MQTT_Error_Flag = false;
 
 
 
@@ -191,7 +194,7 @@ const char* topic_Akku = AKKU;
 const char* topic_Helligkeit = HELL; 
 
 void callback(char* topic1, byte* payload, unsigned int length);
-//void ZeigeZeit(int xPos);
+void ZeigeZeit(tm localTime,int xPos, int yPos);
 void scroll_text(uint8_t ypos, unsigned long scroll_delay, String text, uint8_t colorR, uint8_t colorG, uint8_t colorB, boolean blink);
 void scroll_text2(uint8_t ypos, unsigned long scroll_delay, String text, uint8_t colorR, uint8_t colorG, uint8_t colorB, boolean blink);
 void scroll_Grad(uint8_t ypos, unsigned long scroll_delay, String text, uint8_t colorR, uint8_t colorG, uint8_t colorB, boolean blink);
@@ -342,7 +345,7 @@ void callback(char* topic1, byte* payload, unsigned int length) {
   #endif
 }
 void reconnect() {
-  sprintf(clientName, "%s%s", "Uhr", "_Zentrale" );
+  sprintf(clientName, "%s%s", "TEST", "_DISPLAY" );
   // Loop until we're reconnected
   while (!client.connected()) {
     Serial.print("Attempting MQTT connection...");
@@ -363,6 +366,7 @@ void reconnect() {
       Serial.print(client.state());
       Serial.println(" try again in 5 seconds");
       scroll_text(32-7,80, "MQTT Error", 127,82,0, true);
+      ErrorOld ++;
       // Wait 5 seconds before retrying
       delay(5000);
     }
@@ -622,13 +626,17 @@ void Test()
 void setup() {
   startTime = millis();
   Serial.begin(115200);
-  if (!htu.begin()) {
+ /*  if (!htu.begin()) {
     Serial.println("Couldn't find sensor!");
     NOHTU = true;
     delay(500);
 
+  } */
+ init_HTU21();
+  if (htu21Data.Status == true){
+    read_HTU21D();
   }
-  read_HTU21D();
+
   Init_BME280();
   #ifndef CO2Wert
     beginC02();
@@ -656,14 +664,14 @@ void setup() {
 
 
 //------- TEST -----------
-  /* display.fillRect(31, 5, 2, 6, myRED);
+  display.fillRect(31, 5, 2, 6, myRED);
   delay(2000);
   display.fillRect(31, 5, 2, 6, myGREEN);
   delay(2000);
   display.fillRect(31, 5, 2, 6, myBLUE);
   delay(2000);
   display.fillRect(31, 5, 2, 6, myBLACK);
-  delay(2000); */
+  delay(2000);
   //----------------------
   print_wifi_status();
   configTime(0, 0, NTP_SERVER);
@@ -795,7 +803,7 @@ static void setup_wifi() {
 
   //WiFi.forceSleepWake();
   delay( 1 );
-  WiFi.config( ip, gateway, subnet, dns, secondarDNS);
+  //WiFi.config( ip, gateway, subnet, dns, secondarDNS);
 
   WiFi.begin(ssid, pass);
 
@@ -818,12 +826,32 @@ static void setup_wifi() {
 
 
 void loop() {
+ 
+  /* if (MQTT_Error_Flag == true){
+    if (ErrorOld !=  timeinfo.tm_sec){
+      ErrorOld =  timeinfo.tm_sec;
+      if (SekError <= 10){
+        SekError ++ ;
+        Serial.printf("MQTT ERROR: %5d \n",SekError);
+      }
+      else{
+        SekError = 0;
+        MQTT_Error_Flag = false;
+      }      
+    }
 
-  
-  if (!client.connected()) {
-    reconnect();
   }
   
+  if (MQTT_Error_Flag == false) {
+    if (!client.connected()) {
+      reconnect();
+    }
+  } */
+
+  if (!client.connected()) {
+      reconnect();
+      Serial.printf("\n\n\t\tBis jetzt konnte %3d mal kein Kontakt zum MQTT-Server hergestellt werden.\n\n", ErrorOld);
+  }
   getNTPtime(10);
   client.loop(); 
   
@@ -856,7 +884,9 @@ void loop() {
     {
       if (readHtuFlag == true)
       {
-        read_HTU21D();
+        if (htu21Data.Status == true){
+          read_HTU21D();
+        }
         if (BME280Data.Status == true) {
           Read_BME280();
         }